 |
|
 |
|
 |
| |
Wax products
Exmoor Casting Supplies provide waxes for every use.Waxes suitable for hand modelling/Sculpting, Low pressure injection,brushing,slush casting and hand pouring are supplied in quantities from 1KG upwards.
Brush waxes are available for reproducing the finest details.Injection waxes for producing fine jewellry to heavy sectioned prototype patterns. |
|
|
|
| Aqua J 100 |
| REMET UK’s Aqua J 100 is a high quality jewellery wax intended for the production of small, finely detailed wax patterns. It is designed for use in the small, air pressurised melting/injection pots commonly used in the jewellery trade.
Aqua J 100 is also ideally suitable for gravity pouring into silicone rubber moulds for small figurines and Rapid Prototype parts.
Aqua J 100 has physical properties ideally suited for the production of patterns .. |
| |
| View
full details |
|
| PN. AQJ 100/10 |
10kg |
£48.60 |
|
| PN. AQJ 100/25 |
25kg |
£101.25 |
|
|
| |
|
| |
|
|
| Aqua J 400 |
| Aqua J 400
Remet UK Ltd’s Aqua J 400 is a high quality jewellery wax intended for the production of small, finely detailed wax patterns. It is designed for use in the small, air pressurised melting/injection pots commonly used in the jewellery trade.
Aqua J 400 has physical properties ideally suited for the production of patterns from silicone rubber moulds. Its low melt viscosity ensures that it fills even the most intricate details, givi .. |
| |
| View
full details |
|
| PN. AQJ 400/10 |
10kg |
£64.08 |
|
| PN. AQJ 400/25 |
25kg |
£133.50 |
|
|
| |
|
| |
|
|
| BLUE CARVING WAX |
| BLUE CARVING WAX is a hard, but not brittle, extremely carvable wax.
It is designed to deliver ease of carving yet will retain fine detail.
It is supplied in broken block form, if you require other forms/shapes please contact our office to discuss.
Melting Point: 75°C
Colour: Blue
.. |
| |
| View
full details |
|
|
|
| |
|
| |
|
|
| Castylene B395 |
| A low fill pattern wax suitable for hand pouring and low pressure injection of heavier sectioned parts. .. |
| |
| View
full details |
|
|
|
| |
|
| |
|
|
| EXMOOR BLUE |
| Exmoor Blue has been formulated to suit low pressure injection of waxes, but, can also be utilised for hand pouring.
It has a mid range visosity of 100 cst at 99oC partway between Aqua J100[70Cst] and Aqua J200[200Cst].
Formed in pastilles, colour light blue. .. |
| |
| View
full details |
|
| PN. EXBLUE/10 |
10kg |
£54.00 |
|
| PN. EXBLUE/25 |
25kg |
£112.50 |
|
|
| |
|
| |
|
|
| PREMIERE CARVING |
| Premiere CARVING WAX is designed to deliver ease of carving with the ability to retain fine detail. This wax can be worked easily with carving tools to achieve a texture that is usually only achievable with wood or stone. .. |
| |
| View
full details |
|
| PN. P/CARV/10 |
10kg |
£57.60 |
|
| PN. P/CARV/25 |
25kg |
£124.00 |
|
|
| |
|
| |
|
|
| PREMIERE BACKUP |
| Premiere BACKUP WAX is a cost effectibve back-up wax that may be used for second, third coats.
Melting Point: 73°C
Colour Brown
.. |
| |
| View
full details |
|
|
|
| |
|
| |
|
|
| PREMIERE BRUSH |
| Premiere BRUSH WAX gives excellent first coat properties for slush casting process. Ensures good surface reproduction. Should be brushed onto the mould such that none of the mould is visible; a backup wax is then used at a lower temperature to give strength to the Initial brushed layer.
Melting Point: 83°C
Colour: Purple
.. |
| |
| View
full details |
|
| PN. P/BRUSH/10 |
10kg |
£41.40 |
|
| PN. P/BRUSH/25 |
25kg |
£86.25 |
|
|
| |
|
| |
|
|
| PREMIERE COPPER |
| Premeire COPPER is an extremely pliable, medium soft modelling wax. Can be slightly hand warmed before application.
Melting Point: 61°C
Colour: Dark Tan
.. |
| |
| View
full details |
|
|
|
| |
|
| |
|
|
| PREMIERE STIKTITE |
| Premiere Stiktite is a sticky/adhesive "wax glue" used for assembling patterns to assemblies and general tree construction. .. |
| |
| View
full details |
|
|
|
| |
|
| |
| Displaying Results 1-10 of 10 | |
|
|
|
 |
|
 |
|
|
